Proximon Controls Pvt. Ltd.

Proximon Controls Pvt. Ltd.
Proximon Controls Pvt. Ltd

Counter and Indicators :- PRiCO Proximon Controls Pvt. Ltd

  1. Proximon Controls Pvt. Ltd

    PRiCO

    PRiCO (Programmble intelligent Counter)
    PRiCO provides a very cost - effective and reliable solution to many complex counting requirement.
    What sets PRiCO apart from the convention facet.

  2. SPECIFICATIONS :

    Counting modes

    • » Up counting
    • » Down counting
    • » Quadrature counting
    • » Bi-directional counting


    Display

    7-digit, seven segment LED display (10mm height)
    • » Counter/Totaliser/Batch: 7- digit display
    • » Rate : 5- digit display
    • » RPM : 6- digit display


    Range

    • » Counter/Totaliser:Selectable least count 0.000001, 0.00001, 0.0001, 0.001, 0.01, 0.1, 1
    • » Rate: Rate per minute (RM) / Rate per hour (RH) user selectable. (minimum frequency for Rate mode is 10 Pulses/minute)
    • » RPM: 10 RPM to 360000 RPM


    Set points

    • » 3 user programmable set points.
    • » SET1 , SET2 :Dedicated for COUNTER mode.
    • » SET3 : User programmable for any one of COUNTER / TOTALISER /BATCH / RPM.


    Relay operating mode

    • » Relay ON mode
    • » Relay OFF mode
    • » Pulse time mode
          a) Time pulse repeat mode
          b) Auto-reset mode


    Count inputs

    • » Voltage pulse : 8 to 30 V DC amplitude from proximity switch, encoder.
    • » Potential free contacts from limit switch, micro switch.


    Input frequency

    • » 0 to 6 KHZ: In up / down mode
    • » 0 to 3 KHZ: In quadrature mode / bi-directional mode.


    Sensor supply

    • » 12 V DC, 60mA (+/- 10 %)


    Scale factor

    • » Programmable
    • » scale factor = X x 10Y
          X = From 0.000001 to 9.999999
          Y = 0, 1, 2, -1, -2, -3, -4, -5


    Reset input

    • » Manual / Front panel reset: with enable / disable facility
    • » Remote/ Back panel / Electrical reset: User selectable
          ( minimum time for remote reset is 10 ms. )
    • » Reset through programming mode: User selectable


    Relay outputs

    • » Three Relays ( one relay for each set point )
    • » Relay1/ Relay2 for set1/set2 operation ( COUNTER )
    • » Relay3 for set3 ( COUNTER / TOTALISER / BATCH / RPM ) – Programmable
    • » Relay ratings: Rated for 5 Amp at 230 V AC


    Memory retention

    • » Upto 10 years


    Protection

    • » Parameters
          a) Password protected
          b) Hardware protected (Dip switch setting)
    • » Set points
          a) Software protected (Through program configuration i.e. ‘SdF 3.’)


    Supply

    • » 230 V AC (+/- 10%)


    Mounting

    • » Panel mounting


    Weight

    • » approximately 580 gms


    Operating temperature

    • » 0° to 50° C


    Relative humidity

    • » 10 - 95% non-condensing


    Overall dimensions

    • » (All dimensions are in mm.)


                      Front View                        Side View                             Panel cutout
    counters & indicators

     

  3. OTHER COUNTERS :

     

    Proximon Controls Pvt. Ltd